简体中文 | ENGLISH

Claws Holding valve seat tes,Seal Test (With Safety Door and PLC)

Description

  • Applicable valve type:

  • Gate valve, globe valve, check valve, ball valve, regulating valve, etc.

  • Technical performance and features:
    1. Suitable for testing the strength, sealing and upper sealing performance of flanged connected valves.
    2. Clamping the flange with clamping claw has no external influence on the tested valve, so it meets the requirements stipulated by GB/ t13927-92,JB/ t9092-99 and API598.
    3. The right side of the turnplate can be turned over at 90 degrees (both ends can be selected to turn over and transform), which is convenient for gas seal detection of the valve.
    4. The test medium may be water, gas or kerosene, which shall be selected by the customer and switched through the pipeline control valve.
    5. Equipped with high and low pressure water pump and pressurizing system, water pressure test can be carried out directly. A gas pump interface is reserved. If the gas is used as the medium, the gas pump needs to be customized by the user.
    6. Test media such as water and oil in the test bed can be recycled.
    7. Equipped with the hydraulic automatic unloading system, automatic switching between the high-pressure state and the unloading state can effectively reduce the oil temperature and prolong the service life of the equipment.
    8. This product is equipped with safety protective door and PLC intelligent touch screen control, display and print test pressure system.